Radiator acrylic enamel
|Area of usage||indoor and outdoor|
|Output||8- 10 m2/l|
|Shelf life||36 months|
Water-soluble acrylic enamel formulated to provide smooth glossy finish on surfaces of radiators made of cast iron and steel.
- Perfect adhesion to substrate
Intended for protective and decorative painting of surfaces of radiators and central heating systems made of cast iron and steel, where the maximum temperature of heating medium does not exceed +90°C. Shows very good adhesion when applied on oil paint coats.
Method of use
Surfaces to be painted must be free from dust, degreased and dry. Old coats which poorly adhere to substrate must be removed and roughened with sand paper before painting.Stir the enamel well before use. Where the radiators are to be used in high-humidity rooms (laundry, bathroom) they must be pre-primed with rust-inhibiting paint. Apply one or two coats on the prepared surface using brush, roller or spray station. It is recommended to apply next coat once the previous one is dried i.e. after 2-3 hours. Before application of enamel the radiators must be cooled to avoid enamel tarnishing. If necessary dilute with potable water (max. 2-5%). Apply at substrate and ambient temperatures above +5°C.
Transport and storage
The product should be stored in sealed packaging in temperatures between +5°C and +30°C. Protect against frost.
Protect the eyes and skin; in the event of contact, wash with water immediately. Keep away from children. Secure the surroundings of surfaces painted. Remove any possible spoils without waiting for them to dry out.
Detailed information has been provided in the MSDS chart.
Do not dispose of together with household waste, do not pour into sewer. Manage the waste according to the applicable national regulations on waste handling. Detailed information has been provided in the MSDS chart.