Putty for large voids

Technical parameters
Area of usage indoor and outdoor
Output 1,8 kg/m2
Shelf life 36 months
Packaging 400G – plastic tube
  • Putty for filling large voids and irregularities on walls and ceilings both indoor and outdoor.

    • High adherence to substrate
    • Easy to apply
    • Maximum thickness of a single layer: 5 mm
    • For indoor and outdoor use


    Intended for levelling large voids and irregularities on surfaces made of concrete, aerated concrete, gypsum, cement plaster, lime and cement plaster, gypsum plaster, drywalls, on wood and wood-based materials. Particularly recommended for repairs of facades and as an undercoat for paint and lacquer coats, wallpapers and mineral or acrylic plasters. For indoor and outdoor use.



    Method of use

    Substrate must be clean, dry, free from dust and other loose particles and of good mechanical strength. Brittle and absorptive substrates must be strengthened with acrylic primer. Remove any organic impurities using suitable preparations.  Once squeezed out of the tube apply putty with putty knife or float. Pre-polish. Where the voids are larger reapply putty once the previous layer is dried i.e. after 3-4 hours. Once dry polish the surface with sand paper. Do not use below 5°C.

    Transport and storage

    The product should be stored in sealed packaging in temperatures between +5°C and +30°C. Protect against frost.

    Safety measures

    Protect the eyes and skin; in the event of contact, wash with water immediately. Keep away from children. Secure the surroundings of surfaces painted. Remove any possible spoils without waiting for them to dry out.
    Detailed information has been provided in the MSDS chart.


    Do not dispose of together with household waste, do not pour into sewer. Manage the waste according to the applicable national regulations on waste handling. Detailed information has been provided in the MSDS chart.